- Details
- Category: DSI Site
- Published on Thursday, 14 April 2011 16:20
- Hits: 2560
SIGNPAK Digital Signage in-a-box solutions are instantly deployable and easy to use. There are no expensive cabling
installations or IT staff requirements. Power and a Wi-Fi connection are all that is required to install the display to unlock its
full spectrum of capabilities.
Content can be created and then deployed locally via your LAN, a USB thumb drive or an SD card, or via a subscription based
online content creation and management solution from SignChannel. Advanced users can take advantage of the FTP feature
to directly control the frame through any FTP client, and everyone can enjoy the RSS feature, bringing RSS Feeds from all
over the web directly to the display.
SIGNPAK digital signage in-a-box: medium to large sized LED displays with integrated media players
15"
19"
22"
32"
42"
Digital Signage Comparison – Traditional install vs. SignPak all-in-one
Traditional digital signage solutions require the combination of a monitor, a media player, a server, client and server side software, professional installation and days of training to operate them. SignPak products are all-in-one solutions, easy to use and quick to set up. Everything you need is included.
SignPak products feature LED LCD display with an Integrated Media Player, Wi-Fi and LAN connectivity. Play content locally from internal memory (2GB), via a USB thumb drive or an SD Card. Connect to your Wi-Fi access point for internet access, allowing you to play content from an RSS feed, an FTP Client, or a web based SaaS (software as a service) content management solution.
|
|
Traditional digital signage |
SignPak all-in-one |
|
Hardware Required |
|
All-in-One integrated display |
|
|
|
|
|
Monitor: |
CCFL LCD, Bulky, 4+ inches thick |
LED LCD, Thin, under 2 inches |
|
Media Player |
Mounted separately. Connected to the display via VGA or HDMI. Connected to the server via LAN |
Built-in |
|
Server |
Local Server required. Each media player is connected to the server via Ethernet cable. |
No server required. Web based content management available. |
|
|
|
|
|
Installation |
Ethernet cable generally needs to be run between the media player and the server, requiring professional installation |
Take it out of the box and plug it in. |
|
Set-Up |
Media players are generally networked PC devices, requiring a technician to set up. Advanced networking skills often required. |
Set-up is quick and easy:
|
|
Software |
Both Client and Server side software required. Each license can be very expensive, often costing thousands of dollars. |
NO additional software is required. A media manager is built-in. Web based SaaS (software as a service) options are available and pre-integrated. |
|
|
|
|
|
Total Cost |
$3,000 to $10,000+ per 32” after installation, software license, set-up, support, training, etc… |
$1,499.99 MSRP for a SignPak 32” all-in-one signage solution |